Real Pricing — Not "Contact Us for a Quote"
Most marble gum vendors in Singapore don't publish pricing at all. Here's ours, benchmarked against the current Singapore market. Final price still depends on grout condition, joint width and access, confirmed after a free on-site or photo-based assessment.
| Service | Rate | Minimum charge | Typical timeline |
|---|---|---|---|
| Marble floor regrouting | $2.50 / sq ft | $900 | 1–2 days (typical room) |
| Maintenance repolish (no re-gumming, shine restore only) | $1.00 / sq ft | $250 | Same day, most homes |
| Whole-level / larger jobs | Same rate, volume discount available | — | 3–5 days |
Figures above are benchmark rates based on current Singapore market pricing for marble gum work — to be confirmed/adjusted with your final numbers before launch.
Why Quotes Vary So Much
Grout condition
Deeply blackened, cracked or uneven old grout takes longer to remove and prep.
Joint width & layout
Wider joints and more cutting-in around fixtures add labor time.
Access & furniture
Furniture moving and upper-floor access can add to the quote.
Finish level
A full mirror-gloss finish takes longer than a lower-sheen, less slippery finish.
Pricing FAQ
What is marble floor regrouting using marble gum?
It's a technique for eliminating old, discoloured or uneven grout lines between marble floor tiles. We remove the existing grout, fill every joint with a color-matched marble gum compound, then grind and polish the whole floor level so the joints all but disappear — leaving one seamless, glossy marble surface instead of a grid of visible grout lines. See our full regrouting process for the step-by-step breakdown.
Is my marble floor a good candidate for regrouting?
If your marble floor is laid in tiles or slabs with visible grout joints — especially if those joints have gone black, uneven, or are simply an eyesore against the stone — it's usually a good candidate. If your marble has deep etching, cracks or heavy staining rather than just tired grout lines, we'll tell you honestly that full restoration is the better first step. Send us a photo and we'll give you an honest read before you book anything.
How much does marble floor regrouting cost?
See our full pricing page for a real, itemised rate card — we don't hide behind "contact for quote." Final price depends on grout condition, joint width and the area involved, confirmed after a free photo-based or on-site assessment.
Which brand of gum compound do you use?
We use a quality grout compound rather than the cheaper alternatives some contractors substitute to cut cost. Cheaper gum is more prone to poor color-matching, yellowing and a shorter lifespan — we'll show you the material and a color sample against your own marble before we start.
I've read reviews about marble gum regrouting going wrong — color mismatch, air bubbles, slippery floors. Is this real?
Yes, and we'd rather tell you upfront than have you find out from a forum. These are real, documented failure modes when the wrong material or a rushed crew is used: poor color matching, air bubbles from rushed mixing, a slicker surface underfoot when wet, and damage to adjacent surfaces during grinding. We show you a color sample before we start, use a controlled mixing process to avoid bubbles, can finish with an anti-slip additive on request, and protect adjoining surfaces before grinding begins — see our full guide on this.
How long does regrouted marble last before it needs redoing?
Most marble gum finishes hold their shine for 3–5 years under normal household use, depending on foot traffic and how it's cleaned — see our full guide on how long it lasts. We offer a maintenance-only repolish (no re-gumming needed) at a lower price than a full redo once the shine starts to dull — see Pricing.
Get Your Exact Price
Send photos of your floor and we'll confirm a firm quote — usually the same day.
Request a Quote